Upgrade your CF Moto ZForce 500/800 Trail with a PERFEX™ 2-inch bracket lift kit. Gain ground clearance, fit up to 28" tires, and enjoy Canadian-made quality.
Choose the Best 2-Inch Lift Kit Available for Your CF Moto
Upgrade your CFMOTO ZForce 500 or 800 Trail (2015–2022) with the PERFEX™ Bracket Lift System. Designed to increase ground clearance through optimized shock positioning, this heavy-duty 2-inch lift kit helps your UTV tackle rough terrain, deep ruts, and challenging obstacles with greater ease.
The additional clearance allows you to fit tires up to 28 inches, giving your ZForce a taller, more aggressive stance while helping reduce hang-ups and unwanted contact with obstacles underneath your vehicle.
Heavy-Duty Build Quality
Our lift kit includes heavy-duty front and rear brackets, laser-cut and CNC bent from 3/16-inch Canadian steel for a precise fit. Protected by a durable black powder-coated finish, these brackets are built to withstand demanding off-road conditions. Every structural component is backed by our Lifetime Structural Warranty.
DIY - Simple and Fast Installation
Designed for a direct bolt-on installation, this 2-inch lift kit is easy to install with basic tools and a jack. All necessary hardware and instructions are included, allowing you to have your ZForce ready for the trails in no time.
Stock vs. Lifted: See the Difference a 2-Inch Lift Kit Can Make
Wheel Spacers — Recommended
We strongly recommend installing wheel spacers with this lift kit to help restore track width and maintain a wider, more stable stance. For the CFMOTO ZForce 500/800 Trail, we recommend a minimum of 1.25-inch front wheel spacers and 1-inch rear wheel spacers for the best overall setup.
Features
Lift Your Vehicle — Not Your Spring Preload
PERFEX™ Bracket Lift System Preserves Factory Ride Quality
Fits Tires up to 28 Inches
Lifts Both Front and Rear of the Vehicle
100% Direct Bolt-On Installation
Heavy-Duty 3/16" Steel Brackets
Durable Black Powder-Coated Finish
Complete with All Necessary Hardware
Easy-to-Follow Installation Manual
Made in Canada
Lifetime Structural Warranty
Included in the Box
(4) Front Lift Brackets
(2) Rear Lift Brackets
(1) Installation Manual
(2) PERFEX Stickers
All Necessary Mounting Hardware
Warning
⚠ California Proposition 65 Warning ⚠
This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to p65warnings.ca.gov.
Super fast shipping, meticulously packaged, absolutely reasonable prices, extremely attentive staff ready to solve any issues ( there was none) installed in a 1/2 hour, no cutting no struggling no problems whatsoever and I have thoroughly tested the product, my only possible complaint is that I should have purchased this a long time ago but I have it to enjoy now and I’m pretty sure it will last longer then the machine itself so 100% satisfied customer, Sooke bc Canada
Store owner replied:
Thank you for the great feedback, we really appreciate it! And yeah, being on the other side of the U.S., shipping can take a bit longer — especially with everything going on at the border and customs lately. Sorry about that. Glad to hear the install went smoothly and that you’re happy with how it looks. Enjoy the ride out there. Cheers!!!
Easy install and no more scraping in trails! Love it
Store owner replied:
Thank you, Trevor, for the five-star review and the picture! That ZForce looks great with the lift kit — no more scraping, and no more hearing it either haha. That’s what we like to hear. A+
Store owner replied:
Definitely a great upgrade for the Gen1 ZForce. Whether it’s for extra clearance or simply being able to soften the suspension for a smoother ride, this lift kit is a must-have. Thank you, Linda, for the 5-star review!
Everything arrived on time like they said everything was in a box everything's in good condition the pots look excellent I will update when I can get up to my machine there's 3 feet of snow on the ground right now so I'll get to wait a while
Store owner replied:
Haha yeah, we’re all waiting for summer at this point… way too much snow right now. Thank you so much, Ricardo, for the 5 stars — really appreciate it!
Store owner replied:
Definitely a must-have on the ZForce Trail — the suspension can really be dialed in with the lift kit. Thank you, Gary, for the great five-star feedback!
Store owner replied:
Definitely a great addition for the ZForce — whether for more ground clearance or to remove some preload from the shocks for a smoother suspension. Thank you, Christopher, for the five stars!
One thing on the back brackets the exhaust cover was hard to get around ha to remove the one 10mm bolt then I had enough room.
Store owner replied:
Thank you Lawrence for your feedback! We appreicate it. Sincerely!
Installation of the kit was not difficult. The end result was a tad more than 1.75" lift at the reciever, which is a great improvement. Climbing in and out of the machine is easier with the added height. Can't wait to see how it helps with rocks and tire ruts on the trails! I'm hoping the lift gives me a little more suspension travel, or at least helps with bottoming out the rear suspension when going over whoops.
Store owner replied:
With feedback like that, I’m definitely guessing the 1-star was a slip, aha! Thank you very much, Joseph, for the great comment — glad to hear you’re loving the new lift kit!
Installed in 2 hours. Needed to loosen a heat shield bracket to get the inside back bracket to fit but luckily watched a video before installing so I knew what to do.
Store owner replied:
Thank you, Chad, for the five-star review and the feedback on the installation! I really appreciate the “before and after” pictures you added of the front and rear lift brackets — great touch!
Pretty good fit. The inside cross bracket needed the top motor heat shield bolts loosened to slide up in and fit properly. Also, the oxygen sensor needed to be disconnected and taken under both cross brackets. No big deal. Easy
Store owner replied:
Thank you Brandon! Enjoy the extra ground clearance on your ZForce Trail.
Haven't installed it yet as im still away at sea working till December 2nd...i know these kits come highly recommended and cant wait to see the end result after installation...i will be ordering 4 2inch spacers on the 15th of this month from Perfex to complete the package...Cant wait!!!
Store owner replied:
You are awesome, thank you so much Paul for taking time to leave this review. Keep us posted once it will be installed and don't forget, if you have any question during the install, we can help. A+
Store owner replied:
Thank you Matthew for the feedback on the product/installation. Cheers!
Très bon service ! L'installation a bien été mais je pensais que le côte a cote serait plus haut il a relevé un pouce et demi seulement. Satisfait quand même ..
Store owner replied:
Thank you Norman for the great five stars about our 2" lift kit for the ZForce Trail!
This is the way the machine shoulda come from the factory!!!
I didn’t want the full 2” lift, but instead wanted to use this kit to reduce the preload on the shocks in an attempt to get a better ride.
Installed kit, adjusted springs on front coils all the way back, adjusted rears an equal amount. Turned the compression damping to its fastest setting and voila!!!
Perfect for the trails and washouts we ride. No more spine jarring bumps.
And, I still gained about 3/4” of actual lift.
Well built, super easy to install. Would highly recommend this product!
Store owner replied:
Thank you David for taking time to be back to us with this awesome review on our ZForce lift kit. You are definitely not the first one doing this upgrade for this reason. The ZForce Gen 1 ride hard, and using the lift kit, reducing the preload nuts is an excellent way to recover rider quality, without loosing ground clearance. Cheers!
Store owner replied:
Thank you Christopher for the 5-stars review on our lift kit for the ZForce Trail! We appreciate your business. A+
Easy install!!( with common sense) just the extra height we were after. Nice product, with a lot of thought put into the design. Perfect fit for our cf moto 800 trail. All he parts needed for the install.
Store owner replied:
Hell yeah! Thank you very much Eugene for the great review and pictures!
I recently purchased this product and was pleasantly surprised how fast it came but was very surprised at how fast and easily it installed . After measuring my CFM TO 800 trail stock and after lifting I gained 2 1/2 inches of clearance
. I'm also very happy with the handling after installing it. I gained more travel and better shock response which is a real bonus., Thank you perfect industries
Store owner replied:
Thank you John! Keep us updated once it will be installed. Cheers!
Reasonably priced, I am not a mechanic, but installation was easy and relatively fast. The actual lift I got was 1 1/2 inches front and back, but that should be quite adequate. So far I am pleased with the result.
Store owner replied:
Thank you very much Steve for the update on the product! A+
Excellent, easy to install. I only installed the front lift as I was trying to level it, not lift the whole thing. It would be great if you offered a separate front lift leveling kit.