2-Inch Front Leveling Kit for Yamaha Wolverine 850 X2 (2018+)

$89.99 USD

UPC: 800468000983

Weight: 2.2 lb

About this Product
  • 100% Made in Canada
  • Offers a Lifetime Structural Warranty
  • Perfect for Installing Bigger & Wider Tires
  • Increases Front Ground Clearance by 2.0”
  • Increases Rear Ground Clearance by 2.0”
  • Run up to 28.5" Tires
  • Extremely Durable Construction
  • Powder-Coated for Optimal Durability
  • Direct Bolt-On Application
  • Complete with All Necessary Hardware
  • Includes an Easy-to-Follow Installation Manual
Fitment Vehicle
  • Yamaha Wolverine 850 X2 (2019-2020)
  • Yamaha Wolverine 850 X2 R-Spec (2019-2022)
  • Yamaha Wolverine 850 X2 R-Spec SE (2019-2022)
  • Yamaha Wolverine 850 XT-R (2020-2022)
  • Yamaha Wolverine 850 X4 (2019-2022)
  • Yamaha Wolverine 850 X4 SE (2018-2022)
  • Yamaha Wolverine 850 X4 XT-R (2020-2022)

All orders over $100 USD ($130CAD), shipped to USA and/or Canada, receive fast and free delivery. International orders have shipping fees calculated at checkout, using your shipping address.

*** Some restrictions can be applied.

Learn more about our Shipping Policy.

Easy 30-Days Return

Because we know that any people can change is mind on a purchase, we will accept any returns for up to 30 days from the date of delivery.

*** Customer is responsible to return the product at his fees.

Learn more about our Return Policy.


This product comes with a Lifetime Replacement Warranty. If for any reason, a bracket should bend or break, we will send you a replacement part, free of charge. Whether you pile it up or your buddy took it for that ever-so-innocent test ride, we've got you covered!

*** PERFEX Products are warrantied to the original purchaser only.

Learn more about our Warranty Policy.


Need to lift only the front of your Wolverine 850 X2 because you are tired to slide forward when you drive and to only light down the ground because the nose is to low versus the rear? Or you just want give a little more aggressive look to your X2, without let it cost you too much?

At PERFEX Industries, we have the solution! Our 2 inches front suspension lift kit will be one of your favorite accessories on the SxS! Change the look of your Yamaha Wolverine 850 X2 by adding extra ground clearance on the front.

The kit includes front heavy-duty lift brackets, made of 3/16" thick Canadian steel. All the components are Laser-cut for a perfect fit. Complete this with a Quality black Powder coat finish, and you have a product that it was BUILT TO LAST.







Directly bolt-on to your four-wheeler, this awesome 2” lift kit can be installed by everyone who have a garage with a jack and simple tools. The kit comes with all the necessary hardware and instructions that you will need to install this UTV Lift Kit properly.



  • The front bracket does NOT fit with aftermarket A-arms.


⚠ California Proposition 65 Warning ⚠

WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to p65warnings.ca.gov.


2-Inch Front Leveling Kit for Yamaha Wolverine 850 X2 (2018+)


We offer fast & free shipping on most parts orders over $100 USD ($130 CAD)