Kit de levage 2" — CFMOTO ZForce 800EX/1000 (2014–2022)
4.9
177 Avis177
total des critiques
Prix promotionnel$189.99 USDPrix habituel$199.99 USD
Relevez votre CF Moto ZForce 800EX & 1000 avec le Lift Kit PERFEX™ de 2 po. Augmentez la garde au sol et installez des pneus jusqu’à 30". Fabriqué au Canada.
Part Number: LK-10291
En stock — Prêt à expédier
Livraison gratuite dès 200 $
Aucun droit de douane ni tarif à payer
Retours faciles avec étiquette fournie
Lifetime Structural Warranty — Notre engagement
Souvent achetés ensemble
Kit de levage 2" — CFMOTO ZForce 800EX/1000 (2014–2022)
Prix promotionnel$189.99 USDPrix habituel$199.99 USD
Installation & Compatibilité
Questions sur l'installation ? Vous souhaitez confirmer que ce produit est compatible avec votre ZForce ?
N'hésitez pas à nous contacter ! Nous connaissons nos produits sur le bout des doigts et sommes là pour vous aider.
Choisissez le meilleur Lift Kit de 2 pouces pour votre CF Moto
Rehaussez votre CFMOTO ZForce 800 EX ou 1000 (2014–2022) avec le Système de Lift PERFEX™. Conçu pour augmenter la garde au sol grâce à un positionnement optimisé des shocks, ce kit de levage de 2 pouces permet à votre côte-à-côte d'affronter plus facilement les terrains accidentés, les ornières profondes et les obstacles exigeants.
Le dégagement supplémentaire vous permet d'installer des pneus jusqu'à 30 pouces, donnant à votre ZForce une allure plus haute et plus agressive tout en réduisant les risques d'accrochage et de contact avec les obstacles sous votre véhicule.
Fabrication robuste
Notre kit de levage comprend des supports de levage avant et arrière robustes, découpés au laser et pliés CNC à partir d'acier canadien de 3/16" d'épaisseur pour un ajustement précis. Protégés par un fini durable avec peinture en poudre noire, ces supports sont conçus pour résister aux conditions hors route exigeantes. Chaque composante structurelle est couverte par notre garantie structurelle à vie.
Installation DIY — Simple et rapide
Conçu pour une installation directe par boulonnage, ce lift kit de 2 pouces s'installe facilement avec des outils de base et un cric. Toute la quincaillerie nécessaire ainsi que les instructions sont incluses, de même que deux supports de relocalisation des câbles de frein arrière pour aider à maintenir un acheminement adéquat des câbles de frein après avoir rehaussé votre ZForce.
Ces supports de relocalisation des câbles de frein arrière constituent un ajout important, souvent négligé dans les autres kits de levage conçus pour ce modèle.
AVANT vs. APRÈS : Voyez la différence avec le 2 pouces d'extra
Spacers de roue — Le complément idéal
Nous recommandons de combiner ce kit de levage avec des spacers de roue pour aider à rétablir la largeur de voie et donner à votre ZForce une posture plus large et plus stable. Pour le CFMOTO ZForce 800EX/1000, nous recommandons des spacers de roue de 1.5 pouce à l'avant et de 1 pouce à l'arrière pour une configuration optimale.
Caractéristiques
Rehaussez votre véhicule — Pas la précharge de vos ressorts
Système de Lift PERFEX™ : Garde la qualité de conduite d'origine
Compatible avec des pneus jusqu'à 30"
Rehausse l'avant et l'arrière du véhicule
Installation 100% boulonnée
Supports robustes en acier 3/16"
Revêtement en poudre noir durable
Comprend toute la quincaillerie nécessaire
Inclut 2 supports de relocalisation des câbles de frein arrière
Manuel d'installation détaillé inclus
Fabriqué au Canada
Garantie structurelle à vie
Inclus dans la boite
(4) Supports de levage avant
(2) Supports de levage arrière
(2) Supports de relocalisation des câbles de frein arrière
(1) Manuel d'installation
(2) Autocollants PERFEX
Tout le matériel de montage nécessaire
Avertissement
⚠ Avertissement relatif à la Proposition 65 de la Californie ⚠
Ce produit peut contenir une substance chimique reconnue par l'État de Californie comme pouvant causer le cancer, des malformations congénitales ou d'autres troubles de la reproduction. Pour en savoir plus, consultez p65warnings.ca.gov.
AVIS CLIENTS —
Ce que nos clients en pensent.
De vraies installations. De vrais avis. Kit de levage 2" — CFMOTO ZForce 800EX/1000 (2014–2022)
Customer Reviews
Overall rating: 4.9 / 5 from 177 reviews.
Install was very easy. Took me about an hour and a half and that’ is with greasing all the zerk fittings. Very happy with the new look.
Store owner replied:
The new look with the lift kit is awesome! Nice ZForce, Anthony. Thank you very much for your business and for taking the time to share this review with us. We truly appreciate it. Enjoy the extra clearance! A+
Store owner replied:
Thanks, Greg, for the five stars review!
Put a Perfex 2 inch lift kit on my 800 Ex. It looks great and gives me more clearance. I husband installed it very fast and he said it was very easy to do. Love it!
Store owner replied:
The ZForce looks huge! Thank you very much, Brittany, for the great review and the awesome picture. Now it's time to enjoy the beast!!! A+
Very easy to installed and everything fits perfectly and well made
Store owner replied:
Damn, this ZForce looks sexy as hell! Awesome build, brother — I love it. The orange color of your ZForce matches perfectly with the fall vibes outside. Thanks again, Geoff, for sharing!
Of all my upgrades, my new lift kit was by far the easiest install yet!!! I am so impressed with Perfex!!! I look forward to future purchases, such a great company to deal with!!!!
Store owner replied:
And it made a huge difference, right? I love the before and after pictures — nice job, Dave! We’re definitely looking forward to doing more business with you. Cheers!
Perfex 2in lift fit very good on my 2021 cfmoto zforce 800ex looks awesome with my 28x10x14 tires very simple to install would recommend to anyone wanting a lift.
Store owner replied:
Thank you, Steven, for the great review and picture. Your ZForce looks awesome, bro — and a big thanks for the recommendation. Looking forward to doing more business with you!
Store owner replied:
Thank you Steve for your five star review!
Great product. Made a noticeable difference. Rides great and the install was not bad at all. Can be done in a couple hours with just some basic hand tools. Overall 10/10 would recommend
Store owner replied:
Love the ZForce! Thanks again Roger for this other great 5-stars review on our CFMoto products. Cheers!
Excellent price and shopping experience! Free shipping was quick to the US! Lift kit and wheel spacers were packaged very well. Install was a breeze took maybe 1.5hrs tops. With new 29” tires (measures to 28.5” mounted) and the lift kit helped us gain almost 5” of ground clearance. No longer hitting rocks and obstacles have been a breeze to overcome. Only sight issue was with the 1 3/8” spacers for the brackets and they were about 1/8” short on the tape measure. Nothing a couple washers couldn’t fix. Overall I’m very satisfied and would recommend purchasing this quality lift kit!
Store owner replied:
What an awesome review, damn!!!! Thank you so much Jacob! Your ZForce look awesome with the lift kit and the new tires setup. Love it. And sorry about the issue with the bushing. I take note of this. They should not be smaller than 1-3/8, maybe a mistake in the packaging? Sincerely!
Was just what I needed, fit my 2021 CFMoto Zforce 800 perfectly! Easy to instal, highly recommend!
Store owner replied:
Hell yeah! Thank you Chris for the great 5-stars!
I installed the Perfex 2" lift kit on my 2022 CF Moto 800ex in about 2 hours, fairly straight forward. I had to trim a little off of the rear inner wheel wells on the front, but it fits these 30" Cryptid tires with no rubbing on flat ground at full crank in either direction. I did not put the 1.5" wheel spacers on the front, due to rubbing concerns, but I did install the 1" spacers on the rear and honestly it looks very even. Very happy, it definately helps the look of the little CF.
Store owner replied:
Thanks again Daniel for the five-stars! Wish you a happy new year to you and your family!
Perfect fit for my 2015 zforce 800ex. So easy to install and only took about 20min total. Everything I needed was included and fit spot on. Seems very sturdy and looks great.
Store owner replied:
Twenty minutes is fast, no time for a beer during this install ahaha! Thank you James for the great 5-stars!
Un service client exemplaire! Il y avait une erreur dans le packaging de mon kit; c’est Perfex eux même qui mon contacté pour me prévenir avant même que j’essaie de l’installer. Le lendemain, je recevais le bon morceau!
Store owner replied:
Oh yeah, merci beaucoup Jean-François pour la superbe critique!
Ordered kit for my Z Force 800 ex as soon as it came back in stock. It shipped fast came in 3 days. I had one issue with a bracket, called Perfex and had part issue resolved in time to have my SXS ready for an annual family ride the next weekend!!!! Thanks Perfex industries! Top notch customer support!!
Store owner replied:
Heal yeah brother, it was a pleasure to help you with the issue. A big thanks for this great review William! This ZForce is mud ready ehe, I love it!
After finding out the 22 cfmoto zforce 800ex has the same setup as the zforce 1000 installation was easy. Love the lift kit and the spacers I bought definitely made the machine stand up taller with good width still.
Store owner replied:
Thanks again brother for the great review and picture! Have fun with your new products. Cheers!
Omg what an amazing improvement. Can not express how happy I am. Went over rocks and other stuff and waited for a crunch., NO CRUNCH. If you are thinking about a 2 inch lift stop thinking and get one. This was simply to install and well worth it. Thanks guys well done:)
Store owner replied:
If I'm a customer and that I'm not sure to buy, after I read your review, I complete the purchase for sure ahahaha! THank you so much Hayward for this great review/video, I love it. Cheers!
The extra 2 inch height and the 30 inch tires kept my butt out of the water and didn’t bottom out all weekend
Store owner replied:
Thank you James for the good review!
Easy install. Had a little trouble with putting the heat shield back on due to the lift covering about 1/2 of the bolt hole. Small amount of cutting with a die grinder and got it taken care of.
Store owner replied:
Thank you Robert for your review and sorry for the extra job. Cheers!
Went smooth like butter.. only issue I had on the rear was my e-brake was set. So when I did the opposite side in the rear I released it and got the brake cable released in seconds.
I haven't had a chance to get it on the trail yet but I'm sure it will do fine.
Thank you very much
Store owner replied:
Cool to know, thank you so much William, I appreciate your review!
Overall experience was great, but with a couple snags (instructions vs. actual). For the most part they were plain-and-simple, easy to follow instructions for installing the kit. Front went on without any issues or problems. However, there were 2 concerns I ran into on the rear. I have a 2021 ZForce 800ex and Step 3 of the Rear Installation is incorrect in saying to skip this step as this step does not apply to my '21 800. You still have to remove the bolts for the exhaust plate so that you can slide the brace into position. Additionally, the O2 sensor plug is attached to the rear facing side of the vehicle cross member, which is not addressed in the instructions. I unattached the plug and placed the lift braces in place to prevent them from pinching the sensor wire. I have pictures of these issues issues if Perfex wants to discuss them and update there instructions. Regardless I appreciated the Lift Kit quality. I measured in three specific spots before (B) and after (A) the install (did not adjust shocks yet). Very Happy with this kit, the clearance gained, and the stance of the vehicle.
Hitch B- 11" / A- 13''. Mid Side B- 12 3/8" / A- 14 1/2". Front Winch Opening in Bumper B- 16" / A- 18 1/8" . So this is a true 2" lift kit
Store owner replied:
Damn, those type are review are my favorite. Always appreciated for me to have explicative review like this. Yes please send me those info/picture by email (info@perfexind.com). I will definitely take a look with you. Thank you Brian for taking time to give your review on the product. I'm pretty sure it will help other customers in the future. Cheers!!
Kit was very easy to install, the fit and function were excellent
Store owner replied:
Thank you so much John for the great review!
Just installed Perfex 2" lift on my 2022 ZFORCE 800EX,
Great kit ,super easy install , directions were well laid out, no issues at all with the install.
I'm Running 28" tires on 14x7 wheels ,added the recommended wheel spacers by Perfex 1" rear 1.5 front.
This is the 2nd Perfex lift I have purchased ,1st kit was for my 2020 CFORCE 600 wheeler.
Great Company,great product ,Highly recommend !!!!!
Too bad no sticker with kit though, could always use the extra HP they add !! LOL ;)
Store owner replied:
Amazing ZForce, the picture is just perfect!! A big thanks for the solid review and the great support in our company, Mark. I truly appreciate it. Send me a message with your shipping info at info@perfexind.com, it will be a pleasure for me to sent you a couple of free stickers. Cheers!
Lot when on very quickly and all the parts fit perfectly. Parts are sturdy and went right on with no modifications. Perfect!!!
Store owner replied:
Nice picture, thank you so much Matt for the great review, I truly appreciate it!
My order 2" lift kit for cf moto z force 800ex was great, easy to install,with the exception of 2 spacers which were slightly larger than they should have been.